In class, Cynthia and I did another exercise in reverse engineering by taking apart an old HP printer. Turns out, those things are made of more parts than you'd imagine!
Affordances and Mapping
Some affordances we noticed:
- The tray is paper sized, indicating that we should put paper there
- Lots of finger holes/indents everywhere
- Buttons stick out, making them infinitely more pressable
Some instances of mapping:
- Ink cartridges are distinguished by color
- Buttons had lights behind them, which presumably indicated the printer's activity
Interfaces
This printer is complex! Here are some ways the pieces fit together:
- Pieces are designed to go in but not come out i.e. lots of the plastic bits had "hooks" on them (plastic tab flexures and regular tabs)
- Interior was fastened together by lots of screws
- Paper was funneled through the printer by gears
Cost and Manufacturing
The vast majority of the plastic parts were obviously injection molded, particularly the shell (body) of the printer. The internal coils and wire/rods were extruded, and there were several large stamped metal sheets on the bottom and inside of the printer. Our best guess for the screws' production was casting or rolling, but judging by the crudeness of their form, they are more likely to have been rolled.
Caitlin, Annie, and I did some brainstorming and research into a grip aid for adaptive feathering. Here's what we came up with:
Key Brainstorming Ideas
- Sticky things (attaching fingers to grip)
- Oar modifications (finger holes, ridges, etc.)
- Tying (string to wrap fingers to grip etc.)
- Gloves (may include other categories)
Brainstormed Topic Themes
See mind map: circled purple ideas are most promising research directions. These are:
- Other sports modifications. Since adaptive rowing is relatively new, could look into similar “grip” sports like skiing, golf, tennis, weightlifting, etc.
- Medical braces/equipment.
- What do children use to prevent harm but stay active?
- How do we ensure quick release for safety? How do we prevent our device from harming the hand/body?
- What kinds of material would best allow for flexibility? What types of attachments are possible?
- Sports regulations
Google Research with Links
Below are some interesting companies whose products may inspire a project. Each company’s product has different aspects that could be included/further explored:
Other Thoughts
- Wrist mobility very important
- Skiing are a very good opportunity to build on (as well as other existing adaptive sports equipment)
- What do rowing grip aids already look like?
- What regulations are already in place?
1. How do you begin an erg workout? Would you mind demonstrating?
2. Do you work out alone or with a coach? If a coach is involved, what is their involvement like?
3. What do you do if you encounter a problem during your workout?
4. Describe your typical erg workout.
5. What do you find frustrating about the ergs?
When others ask me what engineering class is like, I reply that I’m taking adult kindergarten because I don’t remember another time since my Play-Doh and building block days that I’ve had so much fun in class. After building our own milk frothers (using Legos!) at the end of Class 2, we spent Class 3 taking apart and analyzing IKEA’s $2 version, comparing it to a higher-end model, and testing out our homemade versions.
IKEA Milk Frother
The IKEA milk frother promises to fully froth hot or cold milk within 20 seconds. I tested this to be true; the device efficiently frothed my cup of cold milk without making any splashes. Its handle is designed with a side push-switch that intuitively fits in the user’s right or left hand. The grooves on the switch and its visible sliding “slot” is an effective affordance. The battery slot at the end of the handle also has grooves that prompt the user to slide the cap out. Once the device is switched on, the most obvious feedback is that the wand begins to spin. I thought that the device’s main weakness was its lack of feedback for battery power. It’s impossible to tell if the device is running out of battery until, presumably, it stops working.
I then disassembled the device and guessed about the nature of each piece. From taking the frother apart, I’ve learned how tricky it is to cram even a few “simple” functionalities into a device. For example, though the push-switch looks uncomplicated from the outside, on the inside it’s connected to the motor circuit by carefully assembled bits of metal.
High End Milk Frother
The IKEA milk frother costs around $3, whereas this higher end milk frother (first photo, to the right) costs $20. They are equally effective at frothing milk, but the higher end milk frother feels clearly made of more durable and aesthetically pleasing materials. The handle is made of heavy, polished plastic, and its bottom is made of rubber. The price differential comes from the high end frother’s use of these materials, but I’d guess that the difference in manufacturing costs isn’t actually that much—most likely, the frother is overpriced due to its market positioning, branding, etc. If I were to buy a milk frother, I’d stick with the IKEA one. Shiny plastic isn’t worth $17 to me.
Homemade Milk Frother
This is the homemade milk frother my partner Michelle and I made. It’s designed to be manually twisted up and down, which turns the wheel through the milk creating bubbles. Though our frother did create bubbles in the milk, it was slower and much more labor-intensive than the IKEA frother. The bubbles it created were gone quickly. Our product’s main affordance is its two handles and its wheel shape, which suggests to the user that they should grasp the handles and turn. The wheels are also visible, so the user knows right away that it’s working. While our product does froth milk to some extent, it fails in comparison to the electric frothers we tested out. In addition, it only works in cups with wide openings. To improve the device, I’d lengthen the handles, make the wheels smaller, and incorporate some mechanism (similar to those used by bicycles) to make the wheels spin faster.